New Build Stage Inspections in Eltham
The slab date is set, but on a sloping block some important work may disappear before the concrete arrives. If the builder is about to backfill behind a retaining wall, cover drainage or close an edge of the excavation, ask which details will still be visible at the next inspection. An independent stage inspection can help you record accessible work and put specific questions to the builder while there is still time to resolve them.
Discuss your Eltham inspection. Send the address, the builder’s next milestone and the earliest date any area will be covered.
Plan around what becomes concealed
| Upcoming work | What to have ready | What a visit may record |
|---|---|---|
| Retaining wall backfill | Current retaining detail, drainage layout and backfill date | Accessible drainage provisions, outlet position and any differences visible against the supplied detail |
| Slab pour on a stepped site | Current footing and slab drawings, including steps and levels | The visible locations and relationship of nominated slab, footing and service details |
| Lining or cladding at a lower level | Wall sections, approved details and product information | Accessible junctions and penetrations before the lining closes the view |
If these dates fall in different weeks, ask whether separate visits are warranted. A slab stage inspection and a pre-plaster inspection answer different questions. A photo taken after backfill may show the outlet and the finished ground level, while the route behind the wall remains concealed.
Bring the drawing that applies to that part of the site
Send the most recent plans and any revised detail that affects the area. On a stepped build, note which drawing reference applies to the upper and lower sections. Where there is a retained wall or an existing drain, identify it separately from the new work. If the inspection finds something different from the supplied detail, ask the builder whether there is an approved revision and who can confirm it. The site levels, stormwater and retaining walls guide can help you prepare those questions.
Illustrative example. The lower retaining wall will be backfilled before the upper slab inspection. The builder supplies a wall section and identifies the intended outlet. The inspector can photograph the accessible portion before backfill and record which part is still incomplete. The builder can then confirm when the outlet connection will be finished and what evidence will be available. A photograph of the pipe at one point cannot establish the full concealed route or certify drainage performance.
Confirm access and the statutory inspection separately
Ask the builder to confirm safe access and who will be on site. An independent inspection records the agreed accessible work. Engineering design, surveys of site levels and testing are separate services. The relevant building surveyor manages the mandatory inspection process for the permit. Nillumbik Council provides guidance on when building permits are needed, and the Victorian Building and Plumbing Commission explains mandatory notifications. Nillumbik building permits · BPC mandatory inspections
Request an Eltham stage inspection with your drawings, access contact and coverage dates. If an area has already been covered, send any dated construction photos and explain the specific question you still need answered.