PRE-PURCHASE INSPECTIONS

Pre-Purchase Inspections — Buying a Home With Previous Termite Repairs

A termite treatment sticker and a line in the vendor’s paperwork can leave you with two different questions. Is there evidence of current pest activity, and what condition is the building in after earlier damage and repairs? Both can matter before you buy. Ask for the actual treatment and repair records, then confirm who will inspect each part and what they can safely reach.

Three reference points: Treatment records, Repair locations, Access limits.
Illustration. Use these reference points to organise the information before booking.

Separate the pest question from the building question

A building inspection can describe accessible condition. For example, it can record visible distortion at a doorway, damaged timber that can be seen, or a floor that feels different beside an old repair. A timber-pest inspection has a different purpose and needs a separately confirmed scope. When you ask for quotes, state that prior termite damage has been disclosed and ask who will examine the risk of timber pests, who will assess visible building condition, and whether the two visits can be coordinated. The Consumer Affairs Victoria guidance on inspecting before you buy explains why buyers may choose specialist inspections as part of due diligence. Consumer Affairs Victoria’s pre-purchase inspection guidance.

Read the paper trail in date order

Start with the first report that located the activity. Compare it with the treatment proposal, completed treatment record, builder’s repair scope, and any later inspection findings. Put a date and area beside each record. “Treated throughout” may describe how a pest contractor dealt with a site, while a repair invoice might only describe replacing boards in one room. Ask for sketches or annotated photographs that identify what was actually affected. If an invoice is missing, write down the unanswered question rather than assuming an undocumented repair never happened. The Victorian buyer due diligence checklist is a separate starting point for the wider purchase. Victorian home buyer due diligence checklist.

Give the inspector the locations before the visit

Tell the agent where the records place the original damage. A repair in a front room can have a very different inspection window if the floor is over a crawl space, a slab or a lower occupied storey. Ask whether the subfloor hatch is known and whether stored items or fitted cabinetry limit the view. Do the same for garages or garden rooms if the original paperwork mentions them. A pest contractor’s diagram can be helpful even where the previous repair has since been painted or covered. Ask for permission for ordinary access through the agent and leave any removal or opening up for separate agreement.

Put one observation in context

Illustrative example. A treatment record identifies activity at the rear corner in 2018. The repair invoice lists new skirting in the bedroom but says nothing about the wall framing. The accessible underside of that room shows no obvious damage from the hatch, while a duct prevents a closer view of the corner. The useful finding is the specific area still out of view. The next question is whether there is a completion photo or repair scope for that wall. If the missing information could change your purchase decision, ask the building and pest specialists whether better access, targeted investigation with consent or a structural opinion is justified.

Ask what the treatment paperwork actually covers

A warranty or service agreement is worth reading alongside the work record. Check who issued it, whether it identifies the current owner or property, the areas included, any inspection schedule and who can explain whether the agreement can transfer. Give contractual questions to your conveyancer and technical questions to the pest specialist. Older records can be valuable even when a warranty is no longer relevant. They may identify the part of the house where a previous inspector saw damage, and the physical location of barriers or inspection points that the next specialist needs to find.

If the extension was built after treatment, ask whether there is separate information for that area. A note about the main house may have a perfectly sensible limit. Recent paving, cladding or garden changes may also change what can now be seen at edges that were accessible before. Tell the pest specialist what changed and when if you have that information. Bring up the mismatch in coverage before the visit so it is documented as a question and considered when access is arranged.

Decide how to handle different findings

A favourable condition observation in an accessible room can coexist with an inaccessible wall. An old treatment record can coexist with uncertainty about the extent of an old repair. Put each finding against the decision you face. If a concern is local, described and observable, a trade may be able to quote the accessible work. If a repair was concealed and the remaining support is material to the purchase, ask what documentary or specialist evidence would narrow the unknown. Ask your conveyancer whether the timing of any proposed further access is compatible with the sale process. Where the answer cannot be obtained in time, the uncertainty should remain explicit in your decision.

Check the repair scope against the parts of the building it names

Make a room-by-room list from the records, starting where the first inspector saw evidence. In each area, distinguish the affected timber, the pieces removed or reinforced and any areas the repairer left in place. A quote headed “termite repairs” might list work to the floorboards and skirting but say little about the joists under them. Ask for the completion invoice and any photographs taken with the flooring lifted. If an engineer prepared a detail or attended the repair, ask for the relevant report or drawing and check that it identifies this house and this area. A photograph of new timber alongside older timber can help identify where work occurred, but a photograph alone rarely shows the design, the condition of the timber behind it or the full extent of the work.

If the record describes a repair at an opening, ask the inspector to look for accessible evidence on both sides of the wall and below it where feasible. A damaged surface near a window and a patch in flooring below may be unrelated. When the records identify different events, keep them separate. If the latest pest report describes a suspected entry point outside the room, note it for the pest inspector as well. That way both inspectors can use the same location names, and a person reading the reports later can tell whether the observations refer to the same part of the property.

Brief the agent before the inspection

Ask whether the agent can organise keys for the outbuildings and confirm the locations of access panels. If a tenant occupies the property, ask what access is practical and how much notice is needed. Explain that the inspectors may need to see accessible sections near the previously affected rooms. The agent or owner can arrange ordinary access in advance. Leave fitted panels, suspect materials and any exploratory work to separately agreed arrangements. Ask the inspectors to tell you promptly if a critical location could not be reached. That may give you time to obtain the records, arrange another visit or decide how much uncertainty you are willing to accept.

Make the access request specific. “Please confirm whether the timber underneath the rear bedroom can be viewed from the existing hatch” is easier to act on than “please make everything accessible”. Access through a hatch still depends on safe clearance, services and site conditions. An inspection report may distinguish an area viewed from a hatch from an area reached and examined more closely. Read that wording when comparing what the inspector could establish with what the old repair record says.

Decide what to do when the documents are incomplete

Use three headings in your notes: “observed now”, “described in records” and “still unknown”. Under the first, record the location and what was visible. Under the second, record the date and who prepared the document. Under the third, write one question per issue. If the question is whether damage is active, put it to the pest specialist. If the concern is how earlier damage affected the load-bearing framing, ask the building inspector what was accessible and whether a structural engineer should assess the particular area. If a builder provides a quote, ask which assumptions affect the cost and what happens if more damage is found during repair.

When purchase timing is tight, ask which unresolved item could materially change your decision. A missing treatment sticker may lead to a request for records. Evidence of possible damage near a support may call for a more direct specialist assessment. Give the agent and your conveyancer the same location and report reference so everyone knows which issue needs a response. The inspection gives you evidence to work with. The final purchase decision still depends on the condition observed, the limitations and the advice you obtain about the contract.

Check the inspection agreement before relying on it

Ask the provider to name the inspection type and the areas it includes. Check the timing of the written report, who will explain the findings and whether you can share it with a specialist who is helping you decide. A building report and a pest report may have different access exclusions. Read both before deciding what parts of the prior repair history are covered.

Make the follow-up manageable

Ask each specialist to describe what they saw, what they could reach, and what question remains. If a builder quotes for repairs, check whether the price covers the observed damage only or allows for what may be found after removal of finishes. If the original work involved load-bearing members and evidence of their repair is missing, discuss whether an engineer should assess that specific area. If you have an auction or contract deadline, give it to the inspectors and ask your conveyancer to explain the timing implications. A completed inspection, the issue of its report and the time available for a specialist follow-up are three separate dates.

Related inspection guides