New Build Stage Inspection Articles

Are Your Articulation Joints Bridged? A Common Brickwork & Render Defect in Melbourne New Builds explains how movement joints work and why bridging can cause long term issues.

A practical guide to new build stage inspections in Grovedale VIC, including timing, common defects and what to expect before handover.

Learn when to book new build stage inspections in Lara VIC, what defects to expect, and how to avoid costly issues before handover.

Lock up stage is a critical point in your build. Learn the most common defects found and why an inspection at this stage can prevent costly issues later.

A practical guide to new build stage inspections in Woodstock VIC, including timing, common defects and what to expect before handover.

Paint defects are one of the most common issues found at handover. Learn what should be fixed before you accept your new home.

Rainheads play a critical role in roof drainage, but installation defects are common in Melbourne new builds. Learn how these issues occur, the risks involved, and when inspections can identify them.

Slab edge alignment plays a key role in new home construction. Learn how inspectors identify issues before the concrete is poured.

Gaps around window frames are a common issue identified during new home construction. This guide explains why they occur, when they matter, and how independent building inspections help ensure they are properly addressed before handover.

Poor silicone sealant is a common issue in new homes. Learn how inspectors identify these defects and why they matter before handover.

Vapour barriers protect new homes from ground moisture, but installation problems can sometimes occur before the slab is poured. Learn what inspectors check during slab stage inspections.

Squeaky laminate floorboards are a common concern in new homes. This guide explains why laminate flooring can creak, when it may be a defect, and how inspectors assess it.

Small gaps around door frames are a common issue in new homes. Learn what causes them, when they may be considered defects, and how independent inspections identify workmanship problems.

Learn what inspectors commonly identify during PCI inspections in new Melbourne homes and why pre-handover inspections can be valuable before settlement.

What inspectors often find during slab stage inspections in Melbourne. Understand common slab preparation issues before concrete is poured.

Independent stage inspections help homeowners in Charlemont understand how their new home is progressing during construction. Learn what inspectors review during slab, frame, lock-up and practical completion stages across the Geelong growth corridor.

Building a new home involves a sequence of construction stages, from site preparation and slab stage through to framing, lock-up, fixing and final handover. This guide explains the full residential building process in Australia and when inspections usually occur during construction.

Lock-up stage is one of the most important milestones in a new home build. Learn what is installed, what inspectors look for, and why this stage matters before internal works begin.

Independent stage inspections help document construction workmanship in new homes across Armstrong Creek, Mount Duneed and the Geelong south-west growth corridor.

Drummy tiles produce a hollow sound when tapped or walked on. This guide explains what causes hollow tiles in new homes, when they are considered defects, and how building inspectors assess tile installation during stage inspections.